Echte Carbon oder Alu innenausstattung
200SX S14a Z-Edition: BLITZ SUS Luftfilter, BLITZ NÜR Spec Cat Back, BLITZ DUAL SBC SpecR, BLITZ Power Meter ID3, Apex Front-Decatpipe,Blow Off, FCD Selfmade, Denso IK24, Hybrid FMIC, Greddy Oilcooler, ApexI Domstrebe, Härteverstellbares Koni Fahrwerk mit H&R Federn, Autometer Boost Gauge, HKS Temp Gauge, 5ZIGEN Pro Racer GN+ 18", Aerotrenz Bodykit
Hab das noch auf der Seite gefunden, wer kann das wichtigste da mal übersetzen?
Is it Real Aluminum?
Please do not be fooled by such small thickness, this is real aluminum with thickness like real aluminum foil which is really thin. However it is not the same as a vinyl dash trim kit like others sell. Vinyl is vinyl. This is actual real aluminum with thickness like vinyl but a bit more thicker. You can tell it is real aluminum by bending it and it will leave a crease like aluminum would. Even though it works and looks like a sticker. The results are outstanding. These kits will not bubble during installation, it will not fold and break in your hands while installing it like vinyl does. This is high quality. The best part about it after you install it is even though it doesn't have the same thickness as our competitors it still looks like any of our competitors dash trims after installation. MEANING YOU BUY IT AT A FRACTION OF A COST, and your dash trim will look like it came with aluminum from the factory even though it didn't because it won't look like something is sticking up from the dash like our competitors dash trims look like.
Is it Real Aluminum?
Please do not be fooled by such small thickness, this is real aluminum with thickness like real aluminum foil which is really thin. However it is not the same as a vinyl dash trim kit like others sell. Vinyl is vinyl. This is actual real aluminum with thickness like vinyl but a bit more thicker. You can tell it is real aluminum by bending it and it will leave a crease like aluminum would. Even though it works and looks like a sticker. The results are outstanding. These kits will not bubble during installation, it will not fold and break in your hands while installing it like vinyl does. This is high quality. The best part about it after you install it is even though it doesn't have the same thickness as our competitors it still looks like any of our competitors dash trims after installation. MEANING YOU BUY IT AT A FRACTION OF A COST, and your dash trim will look like it came with aluminum from the factory even though it didn't because it won't look like something is sticking up from the dash like our competitors dash trims look like.
200SX S14a Z-Edition: BLITZ SUS Luftfilter, BLITZ NÜR Spec Cat Back, BLITZ DUAL SBC SpecR, BLITZ Power Meter ID3, Apex Front-Decatpipe,Blow Off, FCD Selfmade, Denso IK24, Hybrid FMIC, Greddy Oilcooler, ApexI Domstrebe, Härteverstellbares Koni Fahrwerk mit H&R Federn, Autometer Boost Gauge, HKS Temp Gauge, 5ZIGEN Pro Racer GN+ 18", Aerotrenz Bodykit
Eigentlich könnt ihr euchden ganzen Text hier mal durchlesen:
http://www.mimousa.com/info/alumdash.htm
http://www.mimousa.com/info/alumdash.htm
200SX S14a Z-Edition: BLITZ SUS Luftfilter, BLITZ NÜR Spec Cat Back, BLITZ DUAL SBC SpecR, BLITZ Power Meter ID3, Apex Front-Decatpipe,Blow Off, FCD Selfmade, Denso IK24, Hybrid FMIC, Greddy Oilcooler, ApexI Domstrebe, Härteverstellbares Koni Fahrwerk mit H&R Federn, Autometer Boost Gauge, HKS Temp Gauge, 5ZIGEN Pro Racer GN+ 18", Aerotrenz Bodykit
- geiserp
- Sticker Masta'
- Posts: 12114
- Joined: 13.04.2004, 10:18
- Spamabfrage: bUyV1aGrA
- Location: Schweiz
- Contact:
da steht: lassen Sie sich nicht täuschen durch die dünne folie, das ist echtes aluminium wie bei einer aluminium folie. die anderen sets sind aus vinyl (kunststoff). Es sieht zwar aus wie ein aufkleber aber die resultat sind blalblablalbal
Top speed runs are killers no matter how well the car is set up.
Probier doch mal direkt Alufolie, gibts bei Aldi für ca. nen EUR die 25m
Rolle
Ich persönlich find beides nicht so toll. Die Teile aus Echtcarbon sind
schweineteuer, und das nur für "Show" sozusagen. Ne Motorhaube aus
Carbon hat ja noch nen nutzen, aber sowas...
Und die Klebeteile sind zwar recht solide, aber eben auch dick, und stehen
über an den Rändern, was dann auch wieder doof aussieht.
Am besten hat das @SilkeDeluxe gemacht, die Lösung hat mir bislang echt
als einziges zugesagt (mit der Einschränkung das ich perönlich kein
Carbon mag, aber das Ergebnis sah klasse aus):
Rolle
Ich persönlich find beides nicht so toll. Die Teile aus Echtcarbon sind
schweineteuer, und das nur für "Show" sozusagen. Ne Motorhaube aus
Carbon hat ja noch nen nutzen, aber sowas...
Und die Klebeteile sind zwar recht solide, aber eben auch dick, und stehen
über an den Rändern, was dann auch wieder doof aussieht.
Am besten hat das @SilkeDeluxe gemacht, die Lösung hat mir bislang echt
als einziges zugesagt (mit der Einschränkung das ich perönlich kein
Carbon mag, aber das Ergebnis sah klasse aus):
- DJ_Miracle
- Vielfahrer
- Posts: 2732
- Joined: 15.03.2005, 10:33
- Location: Mannheim
- Contact:
- DJ_Miracle
- Vielfahrer
- Posts: 2732
- Joined: 15.03.2005, 10:33
- Location: Mannheim
- Contact: